POWERFLEX® RV-K

Price is per 10 meter

APPLICATION 
Powerflex® RV-K cable is suitable for all types of low voltage industrial-type connections, in urban grids, building installations, etc. Its high flexibility makes the installation process substantially easier and, as a result, is particularly suitable for use in difficult layouts. It can be buried or installed in a tube as well as outdoors without requiring additional protection. This cable can withstand damp conditions including total immersion in water (AD7). 

CONSTRUCTION 
Conductor 
Electrolytic annealed copper conductor, class 5 (flexible) according to EN 60228 and IEC 60228.  Insulation  Cross-linked polyethylene insulation type DIX-3  according to HD 603-1 and type XLPE according to IEC 60502-1.  The standard identification of insulated conductors according to HD 308 and UNE-21089-1, is the following: 
1x               Natural 
2x               Blue + Brown 
3G              Blue + Brown + Green/Yellow 
3x               Brown + Black + Grey 
3x+1x         Brown+Black+ Grey+ Blue (reduced cross-section) 
4G               Brown +Black+Grey + Green/Yellow 
4x                Brown+Black+ Grey+Blue 
5G               Brown + Black + Grey+Blue+ Green/Yellow 
6 or more   Black numbered + Green/Yellow 

Outer sheath  
Flexible PVC outer sheath, type DMV-18 according to HD 603-1 and type ST2 according to IEC 60502-1. Black colour. 

CHARACTERISTICS 
Electrical performance 
Low voltage: 0,6/1 kV. 

Thermal performance 
Maximum service temperature: 90°C. 
Maximum short-circuit temperature: 250°C (max. 5 s). 
Minimum service temperature: -40°C (fixed and protected installations). 
Minimum installation and handling temperature: 0°C (on cable surface). 

Fire performance 
Flame non-propagation according to EN 60332-1/IEC 60332-1.  
Reaction to fire CPR: Eca according to EN 50575. 
Reduced halogen emission. Chlorine <15%. 

Environmental performance  
Chemical & Oil resistance: Good.
UV  Resistant according to UNE 211605.
Water resistance: AD7 immersion. 

Mechanical performance 
Minimum bending radius: 5x cable diameter.  
Impact resistance: AG2 Medium severity. 
Installation conditions  Open Air.  Buried.  In conduit. In tray. 

STANDARDS/COMPLIANCE   
Accoring to 
IEC 60502-1/UNE 21123-2 

Standards and approvals 
AENOR/BUREAU VERITAS/KEMA-KEUR/ROHS/CE 

CPR (Construction Products Regulation) 
Eca