TOXFREER® ZH N2XH flex

Price is per meter

APPLICATION
Toxfree® ZH N2XH flex is a LSHF safety cable for fixed installations.  In the event of fire, it does not emit toxic gases, nor does it give off corrosive gases, avoiding any possible damage to people or electronic equipment.  For these reasons it is highly recommended for use in public places such as: hospitals, schools, museums, airports, bus terminals, shopping malls, offices, laboratories, etc.  

CONSTRUCTION 
Conductor 
Electrolytic annealed copper conductor, class 5 (flexible) according to EN 60228 and IEC 60228.  Insulation  Cross-linked polyethylene insulation type XLPE according to IEC 60502-1. The standard identification of insulated conductors according to HD 308 is the following: 
1x                 Natural 
2x                 Blue + Brown 
3G                Blue + Brown + Green/Yellow 
3x                 Brown + Black + Grey 
3x+1x           Brown+Black+ Grey+Blue (reduced cross-section) 
4G                Brown+Black+Grey + Green/Yellow 
4 x                Brown+Black+ Grey+Blue 
5G                Brown + Black + Grey+Blue+Green/Yellow  

Outer sheath
Low Smoke Halogen Free (LSHF) polyolefin outer sheath. Black colour.  

CHARACTERISTICS 
Electrical performance 
Low voltage: 0,6/1 kV  

Thermal performance 
Maximum service temperature: 90°C. 
Maximum short-circuit temperature: 2500C (max. 5 s).  
Minimum service temperature: -400C (fixed and protected installations). 
Minimum installation and handling temperature: OoC (on cable surface).  

Fire performance 
Flame non-propagation according to EN 60332-1/IEC 60332-1. 
Fire non-propagation according to EN 60332-3-24/IEC 60332-3-24 and EN 50399. 
Reaction to fire CPR: B2c-sla, dl,al according to EN 50575. 
LSHF (Low Smoke Halogen Free) according to EN 60754-1/IEC 60754-1.  
Low smoke emission according to EN 61034/IEC 61034: Light transmittance>80%. 
Low corrosive gases emission according to EN 60754-2/IEC 60754-2.  

Mechanical performance 
Minimum bending radius: 5x cable diameter.  
Impact resistance: AG2 Medium severity.  

Environmental performance 
Chemical & Oil resistance: acceptable. 
UV Resistant according to EN 50618. 
Water resistance: AD5 Jets.  

Installation conditions 
Open Air. Buried. In conduit.  

STANDARDS/COMPLIANCE  

According to
IEC 60502-1  

Standards and approvals 
KEMA-KEUR/CE  

CPR (Construction Products Regulation) 
B2 S1a, d1, a1